220v 0.7mpa Straightening & Cutting Machine With Air Compressor

High Speed 5-12mm Wire Straightening And Cutting Machine​

In order to meet the needs of your business development, reduce labor costs and improve production efficiency, Fangzheng Company will customize the High Speed 5-12mm Wire Straightening And Cutting Machine​ in combination with your existing conditions and needs to meet the efficient production.

The conditions the ​High Speed 5-12mm Wire Straightening And Cutting Machine​ buyer should have when installing:

1) provide the power supply of 380V/50Hz for High Speed 5-12mm Wire Straightening And Cutting Machine​;

2) provide the air compressor: the air supply of a single machine should not be lower than 0.9m³/min; the lowest pressure of air supply is 0.7Mpa.

3) make the foundation according to the ground plot from the High Speed 5-12mm Wire Straightening And Cutting Machine​ seller.

Notes to the High Speed 5-12mm Wire Straightening And Cutting Machine​ user:

1 . The High Speed 5-12mm Wire Straightening And Cutting Machine​ user must do the operation and maintenance in strict accordance with the equipment manual.
2 . Prepare the site for High Speed 5-12mm Wire Straightening And Cutting Machine​ installation must be according to the requirements
3 . Supply power and gas according to the High Speed 5-12mm Wire Straightening And Cutting Machine​ requirements.
4 . Users are required to provide technical staff to assist in the installation, during installation, users need to install the High Speed 5-12mm Wire Straightening And Cutting Machine​ provided free of charge auxiliary equipment.
5 . The High Speed 5-12mm Wire Straightening And Cutting Machine​ should be used in the workshop; the work environment will directly affect the performance and service life of the equipment.